GKA182M144S 575W
GAMKO
Product Name
182mm PERC mono 144 solar half cells 575W
Product Picture
Data sheet
Model | GKA182M144S 575W |
Rated maximum power at stc | 575W |
Maximum power voltage(Vmp) | 42.94V |
Maximum power current(Imp) | 13.39A |
Open Circuit voltage(Voc) | 51.44V |
Short circuit current(Isc) | 14.26A |
Demension | 2279*1134*30MM |
Net weight | 25KG |
Efficiency | 22.06% |
Cell structure | 24*6 |
Working conditions
Maximum system voltage | DC 1000V(IEC) |
Operating temperature | -40℃~+85℃ |
Maximum series fuse | 15A |
NOCT | 45±2℃ |
Application class | Class A |
GAMKO SOLAR MODULE BOM
Monocrystalline silicon solar cells | 182×91mm 10BB |
Ribbon | Ф0.30mm |
bus bar | 4*0.4mm |
5*0.32mm | |
tempered glass | 2273*1128*3.2mm |
EVA(High penetration, for glass side) | 2273*1120*0.6mm(420g/m²) |
EVA(for backsheet side) | 2273*1120*0.6mm(420g/m²) |
backsheet(1500V ) | 2279*1132*0.315mm |
Aluminum alloy frame | 2279*1134*35mm |
Silica gel | TT700J A gel |
TT700J B gel | |
TT600(for frame and junction box use) | |
TT600(back up) | |
junction box | PV-HY02(1300mm)(1500V ) |
barcode | 10×60mm |
label | 112×82mm |
carton | 31pcs/carton |
pallet | 2305*1125*110mm |
paper corners | for 35mm thinkness solar panel use |
Plastic steel belt | 16*0.8mm(width*thinkness) |
Short hard corrugated | 50*50*50*5mm |
Stretch film | thinkness:0.02mm,width:50cm |
Flux | SF105 |
heat resistant tape | 8mm*50m |
EVA Isolate strips | 30*30mm |
Features
M Busbar Solar Cell
M Busbar Solar Cell design improves module effiffifficiency and offffers better
aesthetic appearance for rooftop installation.
High Effiffifficiency:
Higher module conversion effiffifficiency(up to 21.25%) benefifit from Passiv
ated Emmiter Rear Contact (PERC) technology.
PID Resistance:
Excellent Anti-PID performance guarantee limited power degradation
for mass production.
Low-light Performance:
Advanced glass and cell surface textured design ensure excellent perfor
mance in low-light environment
Severe Weather Resilience:
Certifified to withstand: wind load (2400 Pascal) and snow load (5400Pascal).
Durability against extreme environmental conditions:
High salt mist and ammonia resistance certifified.
GAMKO QUALITY CONTROL
2 EL testing avoid cells cracking of each solar module.
2 Power flflash testing avoid false welding and insufficient power of each module.
Packing tightly with angle protection avoid transportation broken.
Gamko offiffifficial Warranty cover all Gamko solar module30 years.
FAQ
Our Services:
-OEM Welcomed
-Warranty: 30 Years
-Certifications can be supported
-Sample for testing is supported
-After-Sale Service: 24 Hour-Hot Line for Consultancy and Technical Support
Delivery time: 15 working days after receiving payment for one container
A:Firstly, we make new panels not stock panel, we will providing the flash test report,Series number, Power rates , voltage, current all mentioned on the flash test report for individual solar panel, The stock panel have no any database. You don't know if they are defective or broken panels. But its not enough. Please ask Gamko provide the flash test photo and EL photo for each panel.
Product Name
182mm PERC mono 144 solar half cells 575W
Product Picture
Data sheet
Model | GKA182M144S 575W |
Rated maximum power at stc | 575W |
Maximum power voltage(Vmp) | 42.94V |
Maximum power current(Imp) | 13.39A |
Open Circuit voltage(Voc) | 51.44V |
Short circuit current(Isc) | 14.26A |
Demension | 2279*1134*30MM |
Net weight | 25KG |
Efficiency | 22.06% |
Cell structure | 24*6 |
Working conditions
Maximum system voltage | DC 1000V(IEC) |
Operating temperature | -40℃~+85℃ |
Maximum series fuse | 15A |
NOCT | 45±2℃ |
Application class | Class A |
GAMKO SOLAR MODULE BOM
Monocrystalline silicon solar cells | 182×91mm 10BB |
Ribbon | Ф0.30mm |
bus bar | 4*0.4mm |
5*0.32mm | |
tempered glass | 2273*1128*3.2mm |
EVA(High penetration, for glass side) | 2273*1120*0.6mm(420g/m²) |
EVA(for backsheet side) | 2273*1120*0.6mm(420g/m²) |
backsheet(1500V ) | 2279*1132*0.315mm |
Aluminum alloy frame | 2279*1134*35mm |
Silica gel | TT700J A gel |
TT700J B gel | |
TT600(for frame and junction box use) | |
TT600(back up) | |
junction box | PV-HY02(1300mm)(1500V ) |
barcode | 10×60mm |
label | 112×82mm |
carton | 31pcs/carton |
pallet | 2305*1125*110mm |
paper corners | for 35mm thinkness solar panel use |
Plastic steel belt | 16*0.8mm(width*thinkness) |
Short hard corrugated | 50*50*50*5mm |
Stretch film | thinkness:0.02mm,width:50cm |
Flux | SF105 |
heat resistant tape | 8mm*50m |
EVA Isolate strips | 30*30mm |
Features
M Busbar Solar Cell
M Busbar Solar Cell design improves module effiffifficiency and offffers better
aesthetic appearance for rooftop installation.
High Effiffifficiency:
Higher module conversion effiffifficiency(up to 21.25%) benefifit from Passiv
ated Emmiter Rear Contact (PERC) technology.
PID Resistance:
Excellent Anti-PID performance guarantee limited power degradation
for mass production.
Low-light Performance:
Advanced glass and cell surface textured design ensure excellent perfor
mance in low-light environment
Severe Weather Resilience:
Certifified to withstand: wind load (2400 Pascal) and snow load (5400Pascal).
Durability against extreme environmental conditions:
High salt mist and ammonia resistance certifified.
GAMKO QUALITY CONTROL
2 EL testing avoid cells cracking of each solar module.
2 Power flflash testing avoid false welding and insufficient power of each module.
Packing tightly with angle protection avoid transportation broken.
Gamko offiffifficial Warranty cover all Gamko solar module30 years.
FAQ
Our Services:
-OEM Welcomed
-Warranty: 30 Years
-Certifications can be supported
-Sample for testing is supported
-After-Sale Service: 24 Hour-Hot Line for Consultancy and Technical Support
Delivery time: 15 working days after receiving payment for one container
A:Firstly, we make new panels not stock panel, we will providing the flash test report,Series number, Power rates , voltage, current all mentioned on the flash test report for individual solar panel, The stock panel have no any database. You don't know if they are defective or broken panels. But its not enough. Please ask Gamko provide the flash test photo and EL photo for each panel.